Bosch (4501) FGR8DQI Platinum IR Fusion Spark Plug, Pack of 1

Got a Question for me? Powered by Aol.com

Product Details

• Fusion's voltage requirement increases less over time versus other iridium plugs for longer reliable performance of the vehicle's ignition system
• Fused iridium and platinum center electrode, sintered into an extended insulator nose results in reaching self-cleaning temperature only seconds after starting and provides exceptional wear resistance
• Revolutionary surface air gap firing technology featuring Bosch's unique four ground electrode design delivers the most powerful spark for the most efficient combustion and optimum horsepower without increasing the voltage requirement
• Four yttrium enhanced ground electrodes resist spark plug wear and oxidation for exceptional performance life
• Factory pre-set gap allows for easy installation that never requires adjustment

Got a Question for me? Powered by Aol.com

Product Details

• Near elimination of performance inhibiting carbon deposits, dramatically longer plug life and a 5-year/100,000 mile limited warranty
• DiamondFire electrode technology that creates a superior spark and resulting flame front extending further into the cylinder, producing more localized pressure
• Significant potential power increase: > 6% to 12% (depending on engine class)
• Significant potential fuel efficiency improvement: > 4% to 13% (depending on engine class)
• Drastic potential emissions reduction when used in 2 and 4-stroke engines (after 50 hours): 58% CO emissions reduction, 42% hydrocarbon reduction

This item is eligible for FREE SHIPPING

Sale Price: $5.95You Save $0.04 (1%)

A breakthrough in spark plug technology. View larger.

DiamondFire electrode design increases cylinder combustion. View larger.

More power and better fuel efficiency, with fewer emissions. View larger.

DiamondFire Technology
For the last 100 years, the only real advance in consumer spark plug technology has been to develop ways to make them cheaper. E3 Spark Plug's DiamondFire technology changes all of that through an improved electrode design that provides for more efficient burning of your vehicle's air/fuel vapor, leading to more pressure in the cylinder. These improvements are measurable, confirmed and based on the following design elements found in existing performance spark plugs.

First, the DiamondFire electrode directs the flame kernel to the piston more directly, reducing the travel time from the spark zone to the end gases via the open section at the top of the electrode. Given the short time available to get combustion started, the faster you can get the flame to the piston, the better. Second, the physical features of the electrode project further forward into the combustion chamber. This brings the spark zone closer to areas of probable "good" air/fuel mixture and also creates beneficial "micro-aerodynamics" within the spark zone. The initial combustion wave leaves the spark area at supersonic speeds above Mach 1, and the elevated edge provides a kind of chimney effect so the next round of air/fuel mixture gets into the spark zone more easily. Finally, the E3 electrode design features forced edge-to-edge spark discharge, which is the best way to get a spark to leave a surface. This improves upon the phenomena that drove race car drivers to "cut back" ordinary electrode spark plugs in order to improve the spark discharge. The spark itself occurs only when an avalanche of electrons migrates from the two electrodes (anode to cathode). Sharp edges are better at initiating electron migrations, and these accelerated electrons collide with matter inside the spark zone to release additional electrons. This design ensures that the whole population of electrons works to create a plasma channel through which the spark current flows more easily, resulting in an increase in both power output and fuel economy, while reducing emissions in gasoline engines and the build up of carbon deposits on engine surfaces.

Key Features:

• DiamondFire electrode technology that creates a superior spark and resulting flame front extending further into the cylinder, producing more localized pressure.
• Power increased > 6% to 12% (depending on engine class).
• Fuel efficiency improved > 4% to 13% (depending on engine class).
• Emissions reduced in 2 and 4-stroke engines (after 50 hours).
  • 58% CO emissions reduction.
  • 42% hydrocarbon reduction.
• Near elimination of performance inhibiting carbon deposits.
• Dramatically longer plug life.
• 5-year/100,000 mile limited warranty.

5-Year or 100,000 Mile Limited Warranty
E3 Automotive spark plugs used for personal, family or household purposes are warranted by the manufacturer to provide an experience of more power on less fuel, quicker starts and less fouling than competitive standard spark plugs, and to be free of defects in material or workmanship, for five years or 100,000 miles from the date of purchase. In the event of provable defect within the stated warranty period, the manufacturer will either replace the item(s), or refund the purchase price at their discretion.

About Pyrotek E3
Headquartered in Point Vedra, Florida, Pyrotek E3, d.b.a. E3 Spark Plugs, was formed to help customers increase power, improve fuel efficiency, and reduce engine emissions that contribute to global warming. Their advanced DiamondFire electrode design burns fuel more efficiently and completely, increasing mileage, horsepower and drastically cutting toxic emissions.

Got a Question for me? Powered by Aol.com

Product Details

• You can depend on NGK for quality and reliability
• Features corrugated ribs, ceramic insulator, copper core and triple interior seal
• Corrosion and abrasion resistant
• Reduces ignition system voltage requirements
• Constructed from durable material

Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly.
Thank you for shopping with us!

Got a Question for me? Powered by Aol.com

Product Details

• Significant potential fuel efficiency improvement: > 4% to 13% (depending on engine class)
• Drastic potential emissions reduction when used in 2 and 4-stroke engines (after 50 hours): 58% CO emissions reduction, 42% hydrocarbon reduction
• DiamondFire electrode technology that creates a superior spark and resulting flame front extending further into the cylinder, producing more localized pressure
• Significant potential power increase: > 6% to 12% (depending on engine class)
• Near elimination of performance inhibiting carbon deposits, dramatically longer plug life and a 5-year/100,000 mile limited warranty

This item is eligible for FREE SHIPPING

Sale Price: $5.95You Save $0.04 (1%)

A breakthrough in spark plug technology. View larger.

DiamondFire electrode design increases cylinder combustion. View larger.

More power and better fuel efficiency, with fewer emissions. View larger.

DiamondFire Technology
For the last 100 years, the only real advance in consumer spark plug technology has been to develop ways to make them cheaper. E3 Spark Plug's DiamondFire technology changes all of that through an improved electrode design that provides for more efficient burning of your vehicle's air/fuel vapor, leading to more pressure in the cylinder. These improvements are measurable, confirmed and based on the following design elements found in existing performance spark plugs.

First, the DiamondFire electrode directs the flame kernel to the piston more directly, reducing the travel time from the spark zone to the end gases via the open section at the top of the electrode. Given the short time available to get combustion started, the faster you can get the flame to the piston, the better. Second, the physical features of the electrode project further forward into the combustion chamber. This brings the spark zone closer to areas of probable "good" air/fuel mixture and also creates beneficial "micro-aerodynamics" within the spark zone. The initial combustion wave leaves the spark area at supersonic speeds above Mach 1, and the elevated edge provides a kind of chimney effect so the next round of air/fuel mixture gets into the spark zone more easily. Finally, the E3 electrode design features forced edge-to-edge spark discharge, which is the best way to get a spark to leave a surface. This improves upon the phenomena that drove race car drivers to "cut back" ordinary electrode spark plugs in order to improve the spark discharge. The spark itself occurs only when an avalanche of electrons migrates from the two electrodes (anode to cathode). Sharp edges are better at initiating electron migrations, and these accelerated electrons collide with matter inside the spark zone to release additional electrons. This design ensures that the whole population of electrons works to create a plasma channel through which the spark current flows more easily, resulting in an increase in both power output and fuel economy, while reducing emissions in gasoline engines and the build up of carbon deposits on engine surfaces.

Key Features:

• DiamondFire electrode technology that creates a superior spark and resulting flame front extending further into the cylinder, producing more localized pressure.
• Power increased > 6% to 12% (depending on engine class).
• Fuel efficiency improved > 4% to 13% (depending on engine class).
• Emissions reduced in 2 and 4-stroke engines (after 50 hours).
  • 58% CO emissions reduction.
  • 42% hydrocarbon reduction.
• Near elimination of performance inhibiting carbon deposits.
• Dramatically longer plug life.
• 5-year/100,000 mile limited warranty.

5-Year or 100,000 Mile Limited Warranty
E3 Automotive spark plugs used for personal, family or household purposes are warranted by the manufacturer to provide an experience of more power on less fuel, quicker starts and less fouling than competitive standard spark plugs, and to be free of defects in material or workmanship, for five years or 100,000 miles from the date of purchase. In the event of provable defect within the stated warranty period, the manufacturer will either replace the item(s), or refund the purchase price at their discretion.

About Pyrotek E3
Headquartered in Point Vedra, Florida, Pyrotek E3, d.b.a. E3 Spark Plugs, was formed to help customers increase power, improve fuel efficiency, and reduce engine emissions that contribute to global warming. Their advanced DiamondFire electrode design burns fuel more efficiently and completely, increasing mileage, horsepower and drastically cutting toxic emissions.

Got a Question for me? Powered by Aol.com

Product Details

• Significant potential fuel efficiency improvement: > 4% to 13% (depending on engine class)
• Drastic potential emissions reduction when used in 2 and 4-stroke engines (after 50 hours): 58% CO emissions reduction, 42% hydrocarbon reduction
• Near elimination of performance inhibiting carbon deposits, dramatically longer plug life and a 5-year/100,000 mile limited warranty
• Significant potential power increase: > 6% to 12% (depending on engine class)
• DiamondFire electrode technology that creates a superior spark and resulting flame front extending further into the cylinder, producing more localized pressure

A breakthrough in spark plug technology. View larger.

DiamondFire electrode design increases cylinder combustion. View larger.

More power and better fuel efficiency, with fewer emissions. View larger.

DiamondFire Technology
For the last 100 years, the only real advance in consumer spark plug technology has been to develop ways to make them cheaper. E3 Spark Plug's DiamondFire technology changes all of that through an improved electrode design that provides for more efficient burning of your vehicle's air/fuel vapor, leading to more pressure in the cylinder. These improvements are measurable, confirmed and based on the following design elements found in existing performance spark plugs.

First, the DiamondFire electrode directs the flame kernel to the piston more directly, reducing the travel time from the spark zone to the end gases via the open section at the top of the electrode. Given the short time available to get combustion started, the faster you can get the flame to the piston, the better. Second, the physical features of the electrode project further forward into the combustion chamber. This brings the spark zone closer to areas of probable "good" air/fuel mixture and also creates beneficial "micro-aerodynamics" within the spark zone. The initial combustion wave leaves the spark area at supersonic speeds above Mach 1, and the elevated edge provides a kind of chimney effect so the next round of air/fuel mixture gets into the spark zone more easily. Finally, the E3 electrode design features forced edge-to-edge spark discharge, which is the best way to get a spark to leave a surface. This improves upon the phenomena that drove race car drivers to "cut back" ordinary electrode spark plugs in order to improve the spark discharge. The spark itself occurs only when an avalanche of electrons migrates from the two electrodes (anode to cathode). Sharp edges are better at initiating electron migrations, and these accelerated electrons collide with matter inside the spark zone to release additional electrons. This design ensures that the whole population of electrons works to create a plasma channel through which the spark current flows more easily, resulting in an increase in both power output and fuel economy, while reducing emissions in gasoline engines and the build up of carbon deposits on engine surfaces.

Key Features:

• DiamondFire electrode technology that creates a superior spark and resulting flame front extending further into the cylinder, producing more localized pressure.
• Power increased > 6% to 12% (depending on engine class).
• Fuel efficiency improved > 4% to 13% (depending on engine class).
• Emissions reduced in 2 and 4-stroke engines (after 50 hours).
  • 58% CO emissions reduction.
  • 42% hydrocarbon reduction.
• Near elimination of performance inhibiting carbon deposits.
• Dramatically longer plug life.
• 5-year/100,000 mile limited warranty.

5-Year or 100,000 Mile Limited Warranty
E3 Automotive spark plugs used for personal, family or household purposes are warranted by the manufacturer to provide an experience of more power on less fuel, quicker starts and less fouling than competitive standard spark plugs, and to be free of defects in material or workmanship, for five years or 100,000 miles from the date of purchase. In the event of provable defect within the stated warranty period, the manufacturer will either replace the item(s), or refund the purchase price at their discretion.

About Pyrotek E3
Headquartered in Point Vedra, Florida, Pyrotek E3, d.b.a. E3 Spark Plugs, was formed to help customers increase power, improve fuel efficiency, and reduce engine emissions that contribute to global warming. Their advanced DiamondFire electrode design burns fuel more efficiently and completely, increasing mileage, horsepower and drastically cutting toxic emissions.

Got a Question for me? Powered by Aol.com

Product Details

• Features superior anti-corrosion and anti-seizing properties
• You can depend on NGK for quality and reliability
• Constructed from durable material
• Fine Iridium tip ensures high durability
• Iridium alloy has extremely high melting point, perfect for today?s high-tech, high-performance engines